LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q50 Sport, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Basic Inspection) (3.0L) (Except Hybrid) >> Basic Inspection >> Engine Oil Data Reset >> Work Procedure

Work Procedure

  1. START 
    1. Turn ignition switch ON.
    2. Check information display of the combination meter.

    Is Distance to Engine Oil Change displayed?

    YES

    GO TO 3 .

    NO

    GO TO 2 .

  2. SELECT OIL CONTROL SYSTEM MODE 

    Push the Display next switch and select oil control system mode.

    GO TO 3 .

  3. RESET ENGINE OIL DATA 
    1. Press and hold the Display Next switch at least 1 second while Distance to Engine Oil Change is displayed.
    2. Stop pressing the Display Next switch, and a few seconds later, check that the value of Distance to Engine Oil Change is reset.

    END

scientia non olet · About LEMON Manuals