LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q50 Pure, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Basic Inspection) (2.0L) (Except Hybrid) >> Basic Inspection >> Teach In Process Sensor Rotor Adaptation >> Work Procedure

Work Procedure

  1. PRECONDITION-1 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. On the CONSULT screen, select "ENGINE">>"DATA MONITOR">>"SEN ROTOR ADAPT CMPLT".
    3. Start the engine.
    4. Push stop/start OFF switch to deactivate stop/start system.
    5. Shift selector lever to manual mode (1st gear).

    GO TO 2 .

  2. START 

    SYMBOL With CONSULT

    1. Accelerate to 20 km/h (13 MPH), and then release the accelerator pedal to decelerate for 4 seconds or more (in the fuel cut status).
      CAUTION: Never rev up the engine speed to 4, 000 rpm or more.
    2. Check "SEN ROTOR ADAPT CMPLT" display.

    Is "YES" displayed on CONSULT screen?

    YES

    END

    NO

    GO TO 1 .

scientia non olet · About LEMON Manuals