LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q50 Pure, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Exterior Lighting System) >> System Description >> Diagnosis System (AFS Control Unit) >> CONSULT Function (ADAPTIVE LIGHT) >> Data Monitor

Data Monitor

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item

[Value/Unit]

Description

STR ANGLE SIG*1

[deg.]

The steering angle value judged by the steering angle sensor signal received from the steering angle sensor via CAN communication

VHCL SPD

[km/h]

The vehicle speed signal value from the combination meter via CAN communication

SLCT LVR POSI

[P/R/N/D/M]

The selector lever status judged by the shift position signal received from TCM*3 or ECM*4 via CAN communication

HEAD LAMP

[On/Off]

The headlamp ON/OFF status judged by the low beam status signal received from IPDM E/R via CAN communication

AFS SW

[On/Off]

NOTE: This item cannot be monitored

REVERSE SW

[On/Off]

NOTE: This item cannot be monitored

HI SEN OTP RR

[V]

The height sensor signal voltage value input from the height sensor

HI SEN OTP FR

[V]

NOTE: This item cannot be monitored

LEV ACTR VLTG

[%]

The ratio value to the battery voltage generated by the aiming motor signal control value judged by AFS control unit

SWVL SEN LH

[deg.]

The headlamp swivel angle value judged by AFS control unit according to the swivel position sensor signal received from the swivel actuator via LIN communication

SWVL SEN RH

[deg.]

SWVL ANGLE LH

[deg.]

The swivel angle command value to the swivel motor judged by AFS control unit

SWVL ANGLE RH

[deg.]

HI SEN INI RR

[V]

Height sensor signal voltage value at height sensor initialization

HI SEN INI FR

[V]

NOTE: This item cannot be monitored

PINION ANGLE*2

[deg.]

The steering pinion angle value judged by the steering pinion angle signal received from the steering force control module via CAN communication

*1 : For models with direct adaptive steering, this item cannot be monitored.

*2 : For models without direct adaptive steering, this item cannot be monitored.

*3 : VR30DDTT engine models

*4 : 2.0L turbo gasoline engine models