LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Driver Assistance System (ADAS Control Unit) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C1B85: Distance Sensor High Temperature Detected >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn the ignition switch OFF.
    2. Wait for 10 minutes or more to cool the ICC sensor.
    3. Start the engine.
    4. Turn the ICC system ON.
    5. Perform "All DTC Reading" with CONSULT.
    6. Check if the "C1B85" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1B85" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO - 1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO - 2 

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals