DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC PRIORITY

If DTC "C1A15" is displayed with DTC "U1000", "C1A03" or "C1A04" first diagnose the DTC "U1000", "C1A03" or "C1A04"

Is applicable DTC detected?

YES

Perform diagnosis of applicable.
- U1000: Refer to DTC LOGIC
- C1A03: Refer to DTC LOGIC
- C1A04: Refer to DTC LOGIC
NO

GO TO STEP 2 .

PERFORM DTC CONFIRMATION PROCEDURE
1. Start the engine.
2. Turn the MAIN switch of ICC system ON.
3. Drive the vehicle at 10 km/h (6 MPH) or faster for approximately 15 minutes or more.
  CAUTION:
  Always drive safely.
4. Stop the vehicle.
5. Perform "All DTC Reading" with CONSULT.
6. Check if "C1A15" is detected as the current malfunction in the "Self Diagnostic Result" of "ICC/ADAS".
Is "C1A15" detected as the current malfunction?

YES

Refer to DIAGNOSIS PROCEDURE .

NO - 1

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2

Confirmation after repair: INSPECTION END