LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX60 Hybrid, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (Hybrid) (2 Of 3) >> DTC/Circuit Diagnosis >> DTC P025A: Fuel Pump Control Module (FPCM) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    GO TO STEP 2  .

  2. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn ignition switch ON and wait at least 5 seconds.
    2. Check DTC.

    Is DTC detected?

    YES 

    Proceed to DIAGNOSIS PROCEDURE .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals