Work Procedure

1. Press and hold the close switch (about 5 seconds) to start initialization movement.
2. Release the switch at the end of the movement.
3. Within 5 seconds after operation 2, press and hold the close switch to perform the learning movement. This will consist of a complete opening movement followed by a complete closing movement.
4. Release the switch at the end of the movement.

* A learning movement consists of a complete, continuous opening movement followed by a complete, continuous closing movement.

GO TO STEP 2  .

1. Operate sunshade switch and check that sunshade automatically operates normally.
2. Perform anti-pinch function check. Refer to DESCRIPTION .

INSPECTION END