LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q60 Base, RWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (Direct Adaptive Steering) (Basic Inspection And DTCS) >> DTC / Circuit Diagnosis >> DTC C13AD-00: Control Module >> DAST 1 >> Component Inspection >> Diagnostic Test

Diagnostic Test

  1. CHECK THE MOTOR

    1. Turn the ignition switch OFF.
    2. Disconnect steering angle main motor harness connector.
    3. Check the continuity between motor connector terminals.
      Steering angle main motor Continuity
      Terminal
      1 2 Existed
      1 3 Existed
      1 4 Not existed
      2 3 Existed
      2 4 Not existed
      3 4 Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Steering angle main motor is malfunction. Replace steering gear assembly. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals