LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "PUSH SW" in "Data Monitor" mode.
    3. Check the Push-Button Ignition Switch signal under the following conditions.
    Test item Condition Status
    PUSH SW Push-Button Ignition Switch is pressed ON
    Push-Button Ignition Switch is not pressed OFF

    Is the indication normal?

    YES 

    INSPECTION END.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals