How To Erase On Board Self-Diagnosis
- Turn the Ignition Switch OFF.
- Start the engine, and then start the on board self-diagnosis.
- Press the CANCEL Switch 5 times, and then press the DISTANCE Switch 5 times under the condition that the on board self-diagnosis starts.NOTE:
- Complete the operation within 10 seconds after pressing the CANCEL Switch first.
- If the operation is not completed within 10 seconds, repeat the procedure from step 1.
- DTC 55 is displayed after erasing.NOTE:
DTCs for existing malfunction can not be erased.
- Turn Ignition Switch OFF, and finish the diagnosis.