LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (ADAS Control Unit) (Introduction, Basic Diagnosis, DTC/Circuit Diagnosis) (1 Of 2) >> DTC/Circuit Diagnosis >> DTC C1A24: NP Range >> ADAS Control Unit >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. CHECK DTC PRIORITY

    If DTC "C1A24" is displayed with DTC "U1000", first diagnose the DTC "U1000".

    Is applicable DTC detected?

    YES 

    Perform diagnosis of applicable. Refer to DTC DESCRIPTION .

    NO 

    GO TO STEP 2  .

  2. CHECK DTC REPRODUCE (1)

    1. Start the engine.
    2. Turn the MAIN Switch of ICC System ON.
    3. Wait for approximately 5 minutes or more after shifting the selector lever to "P" position.
    4. Perform "All DTC Reading" with CONSULT.
    5. Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A24" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    GO TO STEP 3. 

  3. CHECK DTC REPRODUCE (2)

    1. Wait for approximately 5 minutes or more after shifting the selector lever to "N" position.
    2. Perform "All DTC Reading".
    3. Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A24" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO - 1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO - 2 

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals