Work Procedure

CONSULT Configuration

Select "Re/programming, Configuration" of BCM.

When writing saved data 

GO TO STEP 2  .

When writing manually 

GO TO STEP 3  .

CONSULT Configuration

Perform "After Replace ECU" of "Read / Write Configuration".

WORK END

CONSULT Configuration

1. Select "Manual Configuration".
2. Identify the correct model and configuration list. Refer to CONFIGURATION LIST .
3. Confirm and/or change setting value for each item.
   CAUTION:

   Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.

   NOTE:

   If items are not displayed, touch "Next". Refer to CONFIGURATION LIST  for written items and setting value.

4. Touch "Next".
5. Touch "OK".
   CAUTION:

   Make sure to select "OK" even if the indicated configuration of brand new BCM is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model cannot be memorized.

6. Check that the configuration has been successfully written and touch "End".

GO TO STEP 4  .

Confirm that each function controlled by BCM operates normally.

WORK END