With High Beam Assist System
WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- DTC CONFIRMATION
With CONSULT
- Turn ignition switch ON and wait at least 2 seconds.
- Select "Self Diagnostic Result" mode of "HIGH BEAM ASSIST" using CONSULT.
- Check DTC.
Is DTC detected?
YES
Refer to DTC Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Inspection .
NO
Confirmation after repair: INSPECTION END