Direct Adaptive Steering System
WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK THE MOTOR
- Turn the ignition switch OFF.
- Disconnect steering angle sub motor harness connector.
- Check the continuity between motor connector terminals.
Steering angle sub motor
Continuity
Terminal
1
2
Existed
1
3
Existed
1
4
Not existed
2
3
Existed
2
4
Not existed
3
4
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Steering angle sub motor is malfunction. Replace steering gear assembly. Refer to STEERING GEAR AND LINKAGE : Removal & Installation .