Component Function Check
WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "SLIDE PULSE" in "Data monitor" mode of "AUTO DRIVE POS." with CONSULT.
- Check sliding sensor signal under the following conditions.
Monitor item
Condition
Value
SLIDE PULSE
Seat sliding
Operate (forward)
Change (increase)*1
Operate (backward)
Change (decrease)*1
Release
No change*1
*1 : The value at the seat position attained when the battery is connected is considered to be 32768.
Is the indication normal?
YES
INSPECTION END
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .