LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2604: Shift Position >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC B2604 is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or U1010.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. U1000: Refer to DTC Description . U1010: Refer to DTC Description .

    NO

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Shift the selector lever to the P position.
    2. Turn ignition switch ON and wait 5 seconds or more.
    3. Shift the selector lever to the N position and wait 5 seconds or more.
    4. Shift the selector lever to any position other than P and N, and wait 5 seconds or more.
    5. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES

    Refer to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals