System Description: Description

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Log-in function is the function that registers the setting status of various systems and retrieves the status for each Intelligent Key as desired.

Registered information is automatically adjusted to the driving position (seat, steering column, and door mirror position) registered by unlocking the driver side door with the Intelligent Key (Intelligent Key interlock function) or by operating the user selection function on the display.

When user selection is performed by display operation, the user information registered with another Intelligent Key can also be retrieved.

For details on Intelligent Key interlock function, refer to System Description .

NOTE: For the registration of the log-in function, the status is automatically registered as one of the following vehicle statuses when the ignition switch is turned to OFF. For details on registration, refer to Work Flow .

Item	Request status
Ignition position	ON
Driver side door	Close
Navigation system	Activated
CONSULT	Not connected

Operation Procedure

Turn ignition switch ON.
Push desired user change switch on display.
Driver seat, steering and door mirror will move to the memorized position.

Operation Condition

All of the following conditions must be satisfied in order to retrieve the registration information of the log-in function.

If one of the following conditions is not satisfied, the interlocked operation of the driving position for log- in function is interrupted.

Item	Request status
Ignition position	ON
Navigation system	Activated
Initialization	Done
Switch inputs Power seat switch Tilt & telescopic switch Door mirror remote control switch Set switch Memory switch	OFF (Not operated)
A/T shift selector	P position
Log-in function memory	Registered
Vehicle speed	0 km/h (0 MPH)
Seatback	Folded up
CONSULT	Not connected