Initialization Procedure

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHOOSE METHOD
There are two initialization methods.

Which method do you use?

With door switch

GO TO 2.

With vehicle speed

GO TO 3.
WITH DOOR SWITCH
1. Turn ignition switch from ACC to OFF position.
2. Driver door switch is ON (open) -> OFF (close) -> ON (open).
GO TO 4.
WITH VEHICLE SPEED
Drive the vehicle at more than 25 km/h (16 MPH).

GO TO 4.
STEP-4 (SLIDE THE SEAT TO THE FRONT EDGE BY POWER WALK-IN FUNCTION)
Active power walk-in function and let the seat be slid to the front edge.
NOTE:
- STEP-4 is the initialization procedure for power walk-in function.
- If the seat position is already at the front edge, slide the seat backward once and then active power walk-in function.
END