Re/Programming, Configuration
WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
Configuration includes the following functions.
|
Item |
Description |
|
|
Read/Write Configuration |
Before replacing ECU |
Allows the reading of vehicle specification (Type ID) written in steering force control module to store the specification in CONSULT. |
|
After replacing ECU |
Allows the writing of vehicle information (Type ID) stored in CONSULT into the steering force control module. |
|
|
Manual Configuration |
Allows the writing of vehicle specification (Type ID) into the steering force control module by hand. |
|