Fail-Safe Control By DTC
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
BCM performs fail-safe control when any DTC are detected.
| Display contents of CONSULT | Fail - safe |
|---|---|
| B2192: ID DISCORD BCM-ECM | Inhibit engine cranking |
| B2193: CHAIN OF BCM-ECM | Inhibit engine cranking |
| B2195: ANTI-SCANNING | Inhibit engine cranking |
| B2198: NATS ANTENNA AMP | Inhibit engine cranking |
| B219B: ID DISCORD SVT-BCM | Inhibit engine cranking |
| B2608: STARTER RELAY | Inhibit engine cranking |
| B260F: ENG STATE SIG LOST | Inhibit engine cranking |
| B261B: RES ENG RUN STUCK MALFNC | Fuel cut |
| B26F1: IGN RELAY OFF | Inhibit engine cranking |
| B26F2: IGN RELAY ON | Inhibit engine cranking |
| B26F3: START CONT RLY ON | Inhibit engine cranking |
| B26F4: START CONT RLY OFF | Inhibit engine cranking |
| B26F7: BCM | Inhibit engine cranking by Intelligent Key system |
| B26FE: HOOD SW CAN DIAG ERROR | Inhibit remote engine start |