Configuration (BCM): Description
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle specification needs to be written with CONSULT because it is not written after replacing BCM.
Configuration has three functions as follows. (For details, refer to WORK PROCEDURE .)
| Function | Description | |
|---|---|---|
| Read / Write Configuration | Before Replace ECU |
|
| After Replace ECU | Writes the vehicle configuration with saved data. | |
| Manual Configuration | Writes the vehicle configuration with manual selection. | |
NOTE:
Manual setting item: Items which need selection by vehicle specifications
Automatic setting item: Items which are written in automatically (Setting cannot be changed)
For some models and specifications, the automatic setting item may not be displayed.
CAUTION:
When replacing BCM, always perform "Re/programming, Configuration" with CONSULT. Or not doing so, BCM control function does not operate normally.
- Complete the procedure of "Read / Write Configuration" in order.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "Read / Write Configuration" except for new BCM.
- If you set incorrect "Read / Write Configuration", incidents might occur.