Removal And Installation: Installation
Note the following items, and then install in the reverse order of removal.
CAUTION:
- Be careful to tighten "B" terminal nut to the specified torque.
- Install alternator, and check tension of belt. Refer to CHECKING .
- For this model, the power generation voltage variable control system that controls the power generation voltage of the alternator has been adopted. Therefore, the power generation voltage variable control system operation inspection should be performed after replacing the alternator, and then make sure that the system operates normally. Refer to INSPECTION PROCEDURE .
- When installing alternator bracket, tighten mounting bolts in numerical order as shown in the figure.