Precautions For Harness Repair

ITS communication uses a twisted pair line. Be careful when repairing it.

• Solder the repaired area and wrap tape around the soldered area.
  Fig 1: Identifying Soldered And Taped Repair Area

  Courtesy of NISSAN NORTH AMERICA, INC.
  NOTE:

  A fray of twisted lines must be within 110 mm (4.33 in).

• Bypass connection is never allowed at the repaired area.
  Fig 2: Identifying Improper Bypass Connection

  Courtesy of NISSAN NORTH AMERICA, INC.
  NOTE:

  Bypass connection may cause ITS communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.