LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Periodic Maintenance >> Transfer Fluid >> Inspection >> Fluid Level

Fluid Level

  1. Remove filler plug (1) and gasket. Then check that fluid is filled up from mounting hole for the filler plug.
    Fig 1: Identifying Filler Plug
    G07024796Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never start engine while checking fluid level.

  2. Set a new gasket onto filler plug, and install it on transfer and then tighten to the specified torque.
    Specified torque : 48 N•m (4.9 kg - m, 35 ft - lb)
    CAUTION:

    Never reuse gasket.

scientia non olet · About LEMON Manuals