Inspection Procedure

CHECK BATTERY TERMINALS CONNECTION

Check if battery terminals are clean and tight.

Is the inspection result normal?

YES

GO TO STEP 2 .

NO

Repair battery terminals connection.

CHECK FUSE

Check for blown fuse and fusible link.

Unit	Power source (Power supply terminals)	Fuse No.
Alternator	Battery ("S" terminal)	31
Combination meter	Ignition switch ON ("L" terminal)	4

Is the inspection result normal?

YES

GO TO STEP 3 .

NO

Be sure to eliminate the cause of malfunction before installing new fuse.

CHECK "E" TERMINAL CONNECTION

Check if "E" terminal (alternator ground harness) is clean and tight.

Is the inspection result normal?

YES

GO TO STEP 4 .

NO

Repair "E" terminal connection.

CHECK DRIVE BELT TENSION

Check drive belt tension.
- VQ37VHR CHECKING .
Is the inspection result normal?

YES

INSPECTION END

NO

Repair as needed.