LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C1143: Steering Angle Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. DTC REPRODUCTION PROCEDURE

    G-20With CONSULT 

    1. Turn the ignition switch OFF to ON.
    2. Perform "EPS" self-diagnosis.

    Is DTC "C1143" detected?

    YES 

    Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals