LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) (Except Hybrid) >> System Description >> Diagnosis System (ECM) >> Consult Function >> Self Diagnostic Result Mode >> How To Erase DTC And 1ST Trip DTC

How To Erase DTC And 1ST Trip DTC

NOTE:

If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.

  1. Select "ENGINE" with CONSULT.
  2. Select "SELF-DIAG RESULTS".
  3. Touch "ERASE". (DTC in ECM will be erased.)
scientia non olet · About LEMON Manuals