LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX50 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Unit Removal And Installation >> Transfer Assembly >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Remove rear propeller shaft. Refer to REMOVAL AND INSTALLATION .
  2. Remove front propeller shaft. Refer to REMOVAL AND INSTALLATION .
  3. Disconnect AWD solenoid harness connector and separate harness from transfer assembly.
  4. Remove transfer breather hose.
  5. Remove control rod. Refer to REMOVAL AND INSTALLATION .
  6. Support transfer assembly and transmission assembly with a jack.
    CAUTION:

    Secure transfer assembly and transmission assembly to a jack.

  7. Remove rear engine mounting member and engine mounting insulator with power tool. Refer to REMOVAL AND INSTALLATION .
  8. Lower jack to the position where the top transfer mounting bolts can be removed.
  9. Remove transfer mounting bolts with power tool and separate transfer from transmission.
scientia non olet · About LEMON Manuals