LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Sport, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (VDC - Introduction) >> With VDC >> System Description >> System >> System Description >> Condition For Turn On The Warning Lamp

Condition For Turn On The Warning Lamp

Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.

Condition (status) ABS warning lamp Brake warning lamp VDC warning lamp
Ignition switch OFF. OFF OFF OFF
For approx. 1 seconds after the ignition switch is turned ON ON ON ON
Approx. 1 seconds after ignition switch is turned ON (when the system is in normal operation). OFF OFF OFF
After engine starts OFF OFF OFF
When brake fluid is less than the specified level (brake fluid level switch ON) OFF ON OFF
When parking brake operates (parking brake switch ON) OFF ON OFF
VDC function is malfunctioning OFF OFF ON
TCS function is malfunctioning OFF OFF ON
ABS function is malfunctioning ON OFF ON
EBD function is malfunctioning ON ON ON
Brake limited slip differential (BLSD) function is malfunctioning OFF OFF ON
Brake assist function is malfunctioning OFF OFF ON
hill start assist function is malfunctioning OFF OFF ON
Brake force distribution function is malfunctioning OFF OFF ON
When brake booster vacuum decreases OFF ON OFF
When vacuum sensor is malfunctioning OFF ON OFF
VDC function is operating OFF OFF Blinking
TCS function is operating OFF OFF Blinking
ABS function is operating OFF OFF OFF
EBD function is operating OFF OFF OFF
Brake limited slip differential (BLSD) function is operating OFF OFF Blinking
Brake assist function is operating OFF OFF OFF
hill start assist function is operating OFF OFF OFF