Transfer Fluid: Refilling

Remove filler plug (1) and gasket. Then fill fluid up to mounting hole for the filler plug.

Fig 1: Checking Fluid Level From Filler Plug Mounting Hole

Courtesy of NISSAN NORTH AMERICA, INC.

Fluid and viscosity	: Refer to FLUIDS AND LUBRICANTS .
Fluid capacity	: Refer to GENERAL SPECIFICATIONS .

CAUTION:

Carefully fill the fluid. (Fill up for approximately 3 minutes.)

Leave the vehicle for 3 minutes, and check the fluid level again.
Set a new gasket onto filler plug, and install it on transfer and tighten to the specified torque. Refer to EXPLODED VIEW .
CAUTION:
Never reuse gasket.