Wheel Alignment: Adjustment: Toe-In

If toe-in is not within the specification, adjust with adjusting bolt (1) in rear lower link (2).

Fig 1: Identifying Rear Lower Link And Adjusting Bolt
Courtesy of NISSAN NORTH AMERICA, INC.

Standard

Toe-In: Refer to WHEEL ALIGNMENT .

CAUTION:
Be sure to adjust equally on RH and LH side with adjusting bolt.
- If toe-in is not still within the specification, inspect and replace any damaged or worn suspension parts.
- After toe-in adjustment, adjust neutral position of steering angle sensor. Refer to SPECIAL REPAIR REQUIREMENT .