Drive Belts: Checking
WARNING:
Be sure to perform the these steps when engine is stopped.
- Check that the indicator (C) (notch on fixed side) of each auto-tensioner is within the possible use range (A).NOTE:
- Check the each auto-tensioners indication when the engine is cold.
- When new drive belts is installed, the indicator (notch on fixed side) should be within the range (B) in the figure.
- Visually check all drive belts for wear, damage or cracks.
- If the indicator (notch on fixed side) is out of the possible use range or drive belts are damaged, replace drive belts.