Front Drive Shaft And Drive Chain: Assembly

Install plug to front drive shaft.
CAUTION: Never reuse plug.
Install front drive shaft front bearing with the drift (A) [SST: ST33200000 (J-26082)].

Fig 1: Installing Front Drive Shaft Front Bearing Using Drift
Courtesy of NISSAN NORTH AMERICA, INC.
Install front drive shaft rear bearing with the drift (A) [SST: KV38104010 (-)].

Fig 2: Installing Front Drive Shaft Rear Bearing Using Drift
Courtesy of NISSAN NORTH AMERICA, INC.
Set drive chain to front drive shaft.
CAUTION: Identification mark (A) of drive chain should be in the side of front bearing (1) of front drive shaft.

Fig 3: Locating Identification Marks On Drive Chain And Front Shaft Bearing
Courtesy of NISSAN NORTH AMERICA, INC.
Install drive chain to main shaft, and then install front drive shaft.
CAUTION: Never use tools. Always install by hand.
Install front case to rear case. Refer to "ASSEMBLY ".