| Automatic drive positioner control unit |
Door mirror is supplied with power after receiving the input of the MIRROR SWITCH and CHANGEOVER SWITCH. |
| Door mirror remote control switch |
Mirror switch |
It transmits mirror face adjust operation to AUTOMATIC DRIVE POSITIONER CONTROL UNIT. |
| Changeover switch |
It transmits the LH/RH control of door mirror that supplies power to AUTOMATIC DRIVE POSITIONER CONTROL UNIT. |
| Door mirror |
It makes mirror face operate from side to side and up and down via integrated motor. |
| BCM |
The ignition switch signal (ACC/ON) is transmitted to driver seat control unit via CAN communication. |
| Driver seat control unit |
The ignition switch signal (ACC/ON) is transmitted to automatic drive positioner control unit via UART communication. |
| TCM |
The A/T shift position signal is transmitted to driver seat control unit via CAN communication. |