LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> Q70 3.7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid Control System) >> DTC/Circuit Diagnosis >> DTC P062F: Control Module >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait at least 10 seconds.
    3. Repeat step  1 and  2 for 2 times.
    4. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals