LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1233 To P2138 (Convertible) >> DTC P1238, P2119: Electric Throttle Control Actuator >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

      : GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION A AND B 
    1. Turn ignition switch ON and wait at least 1 second.
    2. Shift selector lever to D position (A/T) or 1st position (M/T) and wait at least 3 seconds.
    3. Shift selector lever to P position (A/T) or Neutral position (M/T).
    4. Turn ignition switch OFF and wait at least 10 seconds.
    5. Turn ignition switch ON and wait at least 1 second.
    6. Shift selector lever to D position (A/T) or 1st position (M/T) and wait at least 3 seconds.
    7. Shift selector lever to P position (A/T) or Neutral position (M/T).
    8. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
    9. Check DTC.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: GO TO 3.

  3. PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION C 
    1. Turn ignition switch ON and wait at least 1 second.
    2. Shift selector lever to D position (A/T) or 1st position (M/T) and wait at least 3 seconds.
    3. Shift selector lever to P position (A/T) or Neutral position (M/T).
    4. Start engine and let it idle for 3 seconds.
    5. Check DTC.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals