LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution) (Convertible) >> DTC/Circuit Diagnosis >> DTC B261A: Push-Button Ignition Switch >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK BCM OUTPUT 
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector and IPDM E/R connector.
    3. Check voltage between IPDM E/R harness connector and ground.
      (+) (-) Voltage (V) (Approx.)
      IPDM E/R
      Connector Terminal
      E5 28 Ground Battery voltage

      Is the inspection result normal? 

      YES: Replace IPDM E/R. Refer to "REMOVAL AND INSTALLATION ".

      NO: GO TO 2.

  2. CHECK PUSH-BUTTON IGNITION SWITCH CIRCUIT 
    1. Disconnect BCM connector.
    2. Check continuity between IPDM E/R harness connector and BCM harness connector.
      IPDM E/R BCM Continuity
      Connector Terminal Connector Terminal
      E5 28 M121 60 Existed
    3. Check continuity between IPDM E/R harness connector and ground.
      IPDM E/R Ground Continuity
      Connector Terminal
      E5 28 Not existed

      Is the inspection result normal? 

      YES: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

scientia non olet · About LEMON Manuals