LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0171 To P0463 >> DTC P0182, P0183: FTT Sensor >> Component Inspection (Fuel Tank Temperature Sensor)

Component Inspection (Fuel Tank Temperature Sensor)

  1. CHECK FUEL TANK TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Remove fuel level sensor unit.
    4. Check resistance between "fuel level sensor unit and fuel pump" terminals by heating with hot water as shown in the figure below.
      Terminals Condition Resistance (kΩ)
      4 and 5 Temperature [°C (°F)] 20 (68) 2.3 - 2.7
      50 (122) 0.79 - 0.90
      Fig 1: Checking Fuel Tank Temperature Sensor
      G08855385Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump".