Component Inspection
- CHECK REAR WHEEL STEERING ANGLE SENSOR
- Turn the ignition switch OFF.
- Disconnect rear wheel steering angle sensor harness connector.
- Check the resistance between rear wheel steering angle sensor connector terminals.
Rear wheel steering angle sensor Resistance (Approx.) Terminal 1 - 4 1 kΩ 1 - 2 1.2 - 1.5 kΩ 1 - 3 1.2 - 1.5 kΩ Is the inspection result normal?
YES: INSPECTION END
NO: Replace 4WAS rear actuator. Refer to "REMOVAL AND INSTALLATION ".