Component Inspection (ICC Brake Hold Relay)
WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ICC BRAKE HOLD RELAY
- Turn ignition switch OFF.
- Remove ICC brake hold relay.
- Check the continuity between ICC brake hold relay terminals under the following conditions.
Terminals Condition Continuity 3 and 5 12V direct current supply between terminals 1 and 2 Existed No current supply Not existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace ICC brake hold relay