LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> JX35 AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Unit Disassembly And Assembly >> Drive Pinion >> Adjustment >> Backlash

Drive Pinion: Adjustment: Backlash

  1. Install a bolt to the companion flange.
  2. Fit a dial indicator onto the bolt.
  3. Measure the circumference backlash of the companion flange, and Check that it satisfies the standard below.

    Backlash: Refer to  "BACKLASH ".

    Fig 1: Measuring Circumference Backlash Of Companion Flange Using Dial Indicator
    G04921270Courtesy of NISSAN NORTH AMERICA, INC.
    • If measured value is out of the specification, disassemble it to check and adjust each part.
scientia non olet · About LEMON Manuals