LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> JX35 AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner >> DTC/Circuit Diagnosis >> Sliding Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select "SLIDE PULSE" in "DATA MONITOR" mode with CONSULT.
    2. Check sliding sensor switch signal under the following conditions.
      Monitor item Condition Value
      SLIDE PULSE Seat sliding Operate (forward) Change (decrease)
      Operate (backward) Change (increase)
      Release No change

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals