SYSTEM SETTING: Work Procedure

There are three setting methods.

Which method do you choose? 

With CONSULT: GO TO 2.

With set switch: GO TO  4.

Select "Work support".

: GO TO 3.

1. Select "EXIT SEAT SLIDE SETTING", or "EXIT TILT SETTING" then touch display to change between ON and OFF.
   • EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
   • EXIT TILT SETTING: Entry/exit assist (steering column)
2. Select "SEAT SLIDE VOLUME SET" and touch either of "40 mm", "80 mm", or "150 mm".
3. Then touch "OK".

   : Inspection End.

Turn ignition switch OFF.

: GO TO 5.

Push set switch and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.

• Entry/exit assist (seat/steering column) are ON: Memory switch indicator blink two times.
• Entry/exit assist (seat/steering column) are OFF: Memory switch indicator blink once.

  : Inspection End.