LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> G37 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seats (Convertible) >> DTC/Circuit Diagnosis >> Sliding Limit Switch >> Driver Side >> DRIVER SIDE: Component Function Check

DRIVER SIDE: Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "FWD LIMIT SW" in the "Data Monitor" mode using CONSULT.
    3. Check the sliding limit switch signal under the following condition.
      Test item Condition Status
      FWD LIMIT SW Seat sliding Front edge ON
      Other than above OFF

      Is the indication normal? 

      YES: Sliding limit switch function is OK.

      NO: Refer to "DRIVER SIDE: DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals