LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System - System Component Testing) >> ICC Brake Switch >> Component Inspection (ICC Brake Hold Relay)

Component Inspection (ICC Brake Hold Relay)

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ICC BRAKE HOLD RELAY 
    1. Turn ignition switch OFF.
    2. Remove ICC brake hold relay.
    3. Check the continuity between ICC brake hold relay terminals under the following conditions.
      Terminals Condition Continuity
      3 and 4 12 V direct current supply between terminals 1 and 2 Not existed
      No current supply Existed
      6 and 7 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed
      Fig 1: Checking ICC Brake Hold Relay
      G09001523Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace ICC brake hold relay

scientia non olet · About LEMON Manuals