LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Security Control System) >> Component Diagnosis >> DTC B210B: Starter Control Relay >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 
    1. Turn ignition switch ON.
    2. Check "Self diagnostic result" for IPDM E/R with CONSULT-III.
    3. Touch "ERASE".
    4. Perform DTC Confirmation Procedure. 

      See DTC LOGIC  .

    Is the DTC B210B displayed again? 

    YES: Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .

    NO: INSPECTION END 

scientia non olet · About LEMON Manuals