Component Inspection (Fuel Injector Relay)

CHECK FUEL INJECTOR RELAY

Turn ignition switch OFF.
Remove fuel injector relay.
Check the continuity between fuel injector relay terminals under the following conditions.

Fuel injector relay	Condition	Continuity
terminal	Condition	Continuity
3 and 5	12V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Fig 1: Checking Continuity Between Blower Relay Terminal 3 And 5

Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace fuel injector relay.