High And Low Reverse Clutch: Assembly

Install high and low reverse clutch component part (dish plate, drive plates, driven plates and retaining plate) to high and low reverse clutch drum.
- VQ37VHR models
  
  Fig 1: Identifying High And Low Reverse Clutch Component Part (Dish Plate, Drive Plates, Driven Plates And Retaining Plate) (VQ37VHR)
  Courtesy of NISSAN NORTH AMERICA, INC.
  
  CAUTION: Check the order of plates.
- VK56VD models
  
  Fig 2: Identifying High And Low Reverse Clutch Component Part (Dish Plate, Drive Plates, Driven Plates And Retaining Plate) (VK56VD)
  Courtesy of NISSAN NORTH AMERICA, INC.
  
  CAUTION: Check the order of plates.
Install snap ring to high and low reverse clutch drum using a flat-bladed screwdriver.
CAUTION:
- Be careful not to scratch high and low reverse clutch drum.
- Be careful not to damage snap ring.
Fig 3: Installing Snap Ring To High And Low Reverse Clutch Drum Using Flat-Bladed Screwdriver
Courtesy of NISSAN NORTH AMERICA, INC.
Install bearing race to high and low reverse clutch drum.
CAUTION: Check the direction of needle bearing. Refer to "LOCATION OF NEEDLE BEARINGS AND BEARING RACES ".

Fig 4: Installing Bearing Race To High And Low Reverse Clutch Drum
Courtesy of NISSAN NORTH AMERICA, INC.