Inspection and Adjustment: Adjustment

Loosen nut (<==).
- 2WD
  
  Fig 1: Locating Lower Lever Nut Of A/T Shift Selector Assembly (2WD)
  Courtesy of NISSAN NORTH AMERICA, INC.
- AWD (VQ37VHR models)
  
  Fig 2: Locating Lower Lever Nut Of A/T Shift Selector Assembly (AWD) (VQ37VHR)
  Courtesy of NISSAN NORTH AMERICA, INC.
- AWD (VK56VD models)
  
  Fig 3: Locating Lower Lever Nut Of A/T Shift Selector Assembly (AWD) (VK56VD)
  Courtesy of NISSAN NORTH AMERICA, INC.
Place manual lever and selector lever in "P" position.
While pressing lower lever (A) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to "2WD: EXPLODED VIEW " (2WD) or "AWD: EXPLODED VIEW " (AWD).
CAUTION: Be careful not to touch the control rod while pressing lower lever of A/T shift selector assembly.

NOTE: Press lower lever of A/T shift selector assembly with a force of 9.8 N (approximately 1 kg, 2.2 lb).