Wheel Alignment: Adjustment: Toe-In

Loosen the steering outer socket, and then adjust the length using steering inner socket.
Toe-in: Refer to "WHEEL ALIGNMENT ".
CAUTION:
- Always evenly adjust both toe-in alternately and adjust the difference between the left and right to the standard.
- Always fix the steering inner socket when tightening the steering outer socket.
After toe-in adjustment, adjust neutral position of steering angle sensor. Refer to "WORK PROCEDURE ".
After toe-in adjustment, adjust neutral position of 4WAS front actuator. (With 4WAS) Refer to "WORK PROCEDURE (PATTERN 2) ".